Call Now: 844-788-0138

Kenmore Washer F2 Error Code — Long Fill Time

Kenmore Washer Error Code Reference

F2

Kenmore Washer F2 Error Code — Long Fill Time

Kenmore Washer

Medium Severity
Warning: If your Kenmore appliance displays the F2 error code and you are unsure how to proceed, turn off the appliance and contact a qualified technician. Some errors require professional repair to avoid further damage or safety risks.

The F2 error code on a Kenmore washer means the washer took too long to fill with water. If the tub does not reach the required water level within the programmed fill time, the washer will stop and display F2 to prevent a dry run of the pump and motor.

Causes

  • Low water pressure in the home
  • Supply valve not fully open
  • Clogged inlet valve filter screens
  • Kinked supply hoses
  • Defective water inlet valve

Troubleshooting

  1. Verify both hot and cold supply valves are fully open.
  2. Check hoses for kinks.
  3. Clean inlet valve filter screens.
  4. Test household water pressure at a nearby faucet.
  5. If pressure and hoses are fine, the inlet valve requires professional replacement.

Need Professional Help with Error Code F2?

Our highly trained Kenmore technicians can diagnose and fix this error code quickly — using factory-certified parts and a 30-day warranty.

Other Kenmore Washer Error Codes

F13 Kenmore Washer F13 Error Code — Dispenser Error F14 Kenmore Washer F14 Error Code — Slow Drain F15 Kenmore Washer F15 Error Code — Motor Speed Error F16 Kenmore Washer F16 Error Code — Door Lock Failure F17 Kenmore Washer F17 Error Code — Inlet Valve Error F7 Kenmore Washer F7 Error Code — Motor Control Fault
View All Washer Codes

Schedule Your Kenmore Repair Appointment

Fill out the form below and we'll confirm your appointment within 1 hour. Same-day service available in most areas.