The E2 error code on a Kenmore ice maker indicates the ice harvest cycle failed to complete. The ice tray or mold did not empty successfully within the expected time window.
Causes
- Ice harvest motor failure
- Ice frozen to the tray due to low harvest temperature
- Ice bin full — ice maker cannot dump a new batch
- Thermostat or heater fault preventing proper harvest temperature
What To Do
- Empty the ice bin — sometimes a full bin prevents the harvest arm from completing its cycle.
- Check that the freezer temperature is set to 0°F (-18°C) — too warm and ice won’t fully form; too cold and it adheres to the tray.
- Manually advance the harvest cycle by pressing the test button (if equipped).
- If E2 persists, the harvest motor or thermostat requires professional service.